jayme
Reviewer
4/5
Rien à redire sur le produit qui est en tout point conforme. Pour le montage il faut juste prendre s...
Show More
Show More
on temps et bien suivre les étapes. Les pièces ne sont pas toujours faciles à distinguer les unes des autres ( les montants surtout), ce n’est pas de l’Ikea mais j’ai connu pire. Et puis n’oubliez pas de monter le detendeur avant de fermer les parois latérales ( il suffira d’en démonter une si cette étape est oubliée).
Show Less
Show Less
11 months ago
Cabbage
Reviewer
5/5
Quite a beast
Didnt realise just how big the was - more for a massive overgrown gar...
Show More
Show More
den or something than a normal bit of strimming . Used it to clear brambles and nonsense on an allotment which was great, but due to its size doubt I'll be using it anywhere else. Happy with it though.
Show Less
Show Less
3 years ago
R.G
Reviewer
5/5
Kraftfull
Startar direkt, borrar lätt genom hård lera och stenar
3 years ago
TF
Reviewer
4/5
Great for heavy duty work. Commercial.
I bought this when I set my garden business ...
Show More
Show More
up 5/6 years ago. Its outlast a few other machines. Good on fuel. Plenty of attachments. Only just packed in this year. 2022. And I didnt treat it very well.Extention poles / Reach for hedge cutter is great, if your not strong it will be hard to handle at full length.The power of the Bu-ko, ive had 2 different makes just this year none have matched the Bu-ko in the slightest for power. Also just realised how little vibration / feedback you get of the bu-ko as well, compared to others I have.Bad side of it is, the plastic casings / handle , button are cheap and not great. Also the goggles, earmuffs are nasty. After a while the ruber feeders / supports inside the poles that fix the metal rotating bar in place, start to move or twist making it hard to fix them onto the machine / putting other extention poles together.Would I buy again, yes in hindsight. For price its great. Just would be nice if they matched the quality of the engine power with better fixings, casings, plastics etc.Ferrari engine, fiat panda shell.
Show Less
Show Less
3 years ago
Sue C.
Reviewer
5/5
A very stylish and efficient heater.
Found tricky to assemble but very pleased once...
Show More
Show More
completed, love this heater, delivery very prompt and customer service outstanding! Would recommend tying up in gales as our blew over and glass smashed and top dented! But replacements very easy to obtain!
Show Less
Show Less
3 years ago
Dale Edwards
Reviewer
4/5
Hard to assemble but looks good at the end
Just as everyone else states regarding e...
Show More
Show More
recting the heater it took me around I'd say the 5 hour mark as many of the instructions are in my opinion missing or in the wrong order.The heat output is good and does look pretty classy. I would recommend this heater as it does a Good job, I'm no novice at putting bits together but this was a challenge, I'd give plenty of time
Show Less
Show Less
3 years ago
C dodelé
Reviewer
5/5
Retour / Echange ou remplacement gratuit
La poignée (18) avec interrupteur est cassée ...
Show More
Show More
au niveau du collier (14) pour interrupteur,, je souhaite qu'on me remplace cette pièce , c'est tout , je ne veut pas retourner l'ensemble de l'appareil qui me semble correct au contrôle de réception de ce jour (16/02/2021)
2 people found this helpful
Show Less
Show Less
3 years ago
Amazon Customer
Reviewer
5/5
Excellent product wonderful customer service
A great patio heater with overall heat...
Show More
Show More
ing generating heat over a wide distance Customer service 2nd to none I had a small problem mainly my own fault and it was sorted within days My only concern is instructions could be better ie pointing out magnetic bar points forward to attach door panel
Show Less
Show Less
3 years ago
terry
Reviewer
5/5
Overall very pleased.
It arrived two days early. A fantastic machine that not only ...
Show More
Show More
blows wet leaves but also shifts acorns that the rake did not. Drawback not very comfortable on the shoulders & back so I taped a cushion to the back pack which helps. Manual must have been drawn up by a work experience school kid & the photos very dark. Not much information in the manual but they did help over the phone. First use use 30.1 mix & let it idle for at least 10 minutes before you use it to let it help run in then from then on use 40.1. Started first time. Very pleased with it. Also always run the fuel out to make the carb & fuel tubes last longer. 5 ⭐️
2 people found this helpful
Show Less
Show Less
3 years ago
Janis Kagis
Reviewer
5/5
Good
Ok
3 years ago
S1000rr
Reviewer
5/5
Trés bien
Trés bon produit, pour le prix, j'aimerai qu'il prenne un peu plus de tour, ...
Show More
Show More
mais souffle trés bien, mieu que le styl de mon pere prévu pour les cantoniers.Plastiques de moins bonne qualité que le stil, mais on peut pas tout avoir, pour 2h00 non stop puis 15 min toutes les semaines, il fonctionne trés bien, je recommande. Facile à monter
One person found this helpful
Show Less
Show Less
3 years ago
Martin P.
Reviewer
3/5
Don't waste your money, get the cheaper Amazon alternative.
Where do I start... The...
Show More
Show More
panels were scratched where the factory has cut the protective plastic on the metal... In one place so badly scratched I've put that panel at the back to hide it as best as possible...The instructions left out steps and are very awkward to read due to very small diagrams.The heat output is massively disappointing, I thought I would spend more money to ensure a quality product and I honestly wish I had gone for one of the £179.99 ones from Amazon Essentials instead.The included cover doesn't fit the unit at the bottom as it's too small.The additional Bluetooth speaker is just a random cheap Bluetooth speaker that doesn't fit to the unit in any way shape or form, seriously do not bother with it. You can get yourself a decent Bluetooth speaker for exactly the same price.All in all rather disappointed.
10 people found this helpful
Show Less
Show Less
3 years ago
Amazon Customer C Stevenson
Reviewer
3/5
A bit of a disappointment
On paper, sounds very good, and I saw a review which rate...
Show More
Show More
d it highly. All the tools, plus two extension poles, so worth a try. However, you see many of these with identical hardware badged under different brands.First problem was the handle - it had a locating lug but there was no corresponding hole in the shaft to locate the handle into, and so the handle could not be fitted without drilling a hole in the shaft - I didn't do it. So there is a picture of the shaft and the handle with the lug.Starting it up, the throttle sticks on high. The design of this is the same on all the other clone ones I saw, not very good.The label for choke operation was put on upside down, so choke would be off when you thought it was on.The plastic felt very cheap, and the accessories were very flimsy and lightweight.Good points were the splined shaft, and the fact the shaft ran in bearings, but were they good quality?It's heavy, and after trying it for a few seconds on the hedge cutter, I drained all the fuel and asked for a refund.Sending it back was ok, a pre-paid label was issued, but dropping it in at a Post Office was a pain - it's a big heavy box.Having said that, refund was smooth so I can't complain about that.Most of it was made in PRC , but some bits had 'Japan' stamped on them.You pay your money and you take your choice, except P.R.C has eliminated most of the competition.
3 people found this helpful
Show Less
Show Less
3 years ago